Baby Doll Stroller Leo: Setup and Everyday Use Tips

By Playroom Collective | Published: 2026-10-31

Category: Product Reviews

A practical walkthrough for the Konges Sloejd Leo doll stroller: how to set it up, use it with 13-inch dolls, and keep play safe and smooth.

Quick answer

Unbox the Konges Sloejd Leo stroller, check the frame and wheels, then attach the wheels and seat according to the included instructions before letting your child push it. For everyday use, treat it as a doll pram for 13-inch dolls and smaller, and do a quick safety check each time it comes out of the toy box.

Why the Leo stroller suits 13-inch dolls

The Leo is built on the same sturdy sage frame and smooth double-wheel system as the rest of the Konges Slojd stroller collection, so it handles indoor floors and short outdoor walks without feeling flimsy. That makes it a good match for 13-inch dolls, which are light enough for a child to push comfortably but large enough to feel like a real passenger.

The embroidered cherry detail and cream-and-brown leopard print are the standout features, but they also mean the fabric deserves a little care. Keep the stroller out of prolonged direct sun and wipe spills promptly to preserve the print.

What to check before the first roll

Because the stroller arrives with some assembly required, set aside ten minutes to inspect all parts before your child uses it. Confirm the frame locks open, the wheels spin freely, and the seat fabric is securely attached. If anything feels loose or missing, contact the retailer before use rather than improvising.

Also decide where the stroller will live. A dedicated spot near the door or toy area reduces the chance of it being dragged over stairs or used as a step stool.

Step-by-step setup and everyday use

Unbox and sort the parts: Lay out the frame, wheels, seat fabric, and any small hardware. Check each piece against the included instruction sheet before assembly. Common mistake: losing small parts in the packaging and forcing the frame together without them. Keep the instruction sheet and any Allen key in a zip bag for future adjustments.
Attach the wheels: Push each wheel onto its axle until it clicks or seats fully, then spin it by hand to confirm free movement. Common mistake: not pushing the wheel all the way on, which causes wobbling and can damage the axle. If a wheel does not click, stop and check that you have the correct wheel for that corner.
Lock the frame open: Open the frame until the locking mechanism engages, then press down on the handle to test stability. Common mistake: leaving the frame partially open, which makes the stroller tip easily when a doll is placed inside. You should hear or feel a distinct click when the frame is fully open.
Fit the seat fabric: Slide the seat fabric over the frame and secure any straps or fasteners according to the instructions. Common mistake: twisting straps or leaving them loose, which can let the doll slip sideways. Tug gently on the fabric to confirm it is tight and evenly aligned.
Do a pre-play safety check: Before each use, glance at the wheels, frame lock, and fabric attachments. Common mistake: skipping this check after the stroller has been stored or bumped around. A five-second check prevents most tip-overs and wheel failures.
Seat the doll correctly: Place a 13-inch doll or smaller into the seat, facing forward, and use any supplied harness or strap if present. Common mistake: overloading with larger dolls or multiple dolls, which strains the frame and raises the center of gravity. If the doll does not sit comfortably, it is too big for this stroller.
Push on smooth surfaces first: Let your child practice indoors on carpet or smooth flooring before trying outdoor pavements. Common mistake: heading straight for gravel or curbs, which can jam the double wheels. Outdoor use is fine on flat, smooth paths; carry the stroller over rough ground.

Product facts

Konges Sloejd | Baby Doll Stroller - Leo: The Leo uses the collection's sturdy sage frame and smooth double-wheel system, with a cream-and-brown leopard print and embroidered cherry detail. The double wheels make pushing smoother on uneven floors, while the fabric print means you should keep it away from rough surfaces and prolonged sun.
Konges Sloejd | Baby Doll Stroller - Leo